Home | Stories | Reviews | TreoCast | Treo Store | Accessories | Software | Discussion at webOS Nation | Mobile | About | Search
 
treocentral.com >> FAQ
FAQ: How can I perform a reset as if the battery were disconnected from my Treo 600?

FAQ #63: Troubleshooting. By treo.tc. Status: Public, 24829 views. Flag for Review

IF you've tried everything to fully reset your Treo and conthing else has worked, consider trying a battery disconnect reset.

Use this procedure only as a last resort. Be sure your device is backed up, because you will loose all data on your Treo (except the standard apps).

This procedure is similar to a hard reset, except that it disconnects all power to the unit. Power is restored upon the next connection to a physical power source (a cradle or cable).

1. Make sure the Treo is disconnected from all power sources.
2. While holding down the keys: k, Backspace - push the reset button with the paper clip for 4 seconds.
3. Release all keys.
4. Allow device to sit for 60 seconds.
5. Connect the Treo to a power source and turn it on by pressing the power button.


 
This FAQ is currently rated:

(Rate by clicking the rightmost Vinne that this FAQ deserves)



 
 

Copyright 1999-2016 TreoCentral. All rights reserved : Terms of Use : Privacy Policy

TREO and TreoCentral are trademarks or registered trademarks of palm, Inc. in the United States and other countries;
the TreoCentral mark and domain name are used under license from palm, Inc.
The views expressed on this website are solely those of the proprietor, or
contributors to the site, and do not necessarily reflect the views of palm, Inc.
Read Merciful by Casey Adolfsson