Home | Stories | Reviews | TreoCast | Treo Store | Accessories | Software | Discussion at webOS Nation | Mobile | About | Search
 
treocentral.com >> FAQ
FAQ: Help! My Treo won't charge in the cradle, what do I do?

FAQ #98: Troubleshooting. By bendes. Status: Public, 15836 views. Flag for Review

Please enter your comments, corrections, concerns, suggestions, or any querys below and click continue to flag this FAQ entry for review.



The In-Cradle Reset will reboot the recharge circuitry. Here's how to perform an in-cradle reset:

1- Connect your treo to its charger If you are using a power cradle, make sure the power adapter is attached to the cradle or cable and plugged into a live power outlet.

2- Without lifting the Treo off the cradle or cable, perform a soft reset.

 
This FAQ is currently rated:

(Rate by clicking the rightmost Vinne that this FAQ deserves)



 
 

Copyright 1999-2016 TreoCentral. All rights reserved : Terms of Use : Privacy Policy

TREO and TreoCentral are trademarks or registered trademarks of palm, Inc. in the United States and other countries;
the TreoCentral mark and domain name are used under license from palm, Inc.
The views expressed on this website are solely those of the proprietor, or
contributors to the site, and do not necessarily reflect the views of palm, Inc.
Read Merciful by Casey Adolfsson